Features:

☆This equipment is applies at electric powered model cars, please according to the following data to select the collocate range.
☆This equipment adopt the latest emulational brake technic to inprove the stability, it also can avoid the spark between carbon brush and rotor caused by brake, and extend the working life for the carbon brush of motor.
☆The low-voltage protect function of it will turn off the electrode output when the average voltage depress to 5V. It can avoid to damage the battery or affect the electric equipments around it. This ESC only has minimal cubage, but can offer enough power. As the resistance by itself is only 0.0013.
☆When the motor was blocked up. The ESC will drop the current automaticly to protect itself.
 

Operation Manual:
 

1. Connect with the battery correctly, the red cable in the PCB is anode, the black cable is cathode.(Or connect with the standard DC battery plug.)
2. Turn on the power switch, if no signal input the motor will sound "bi~~bi~~bi~~" to be warning. When the normal signal is immited, the warning sound will be stopped.
3. Turn on the controller, adjust the ST trimer till the red and green indicator light is turn off Pull the accelerator stick to backward, the green light will be bright, the car will go forward. Then push the stick back to be middle, it will be brake state.. If the range of pull-back is more bigger, the brack will be more tighten. Pull the accelerator stick to the middle, then push forward one more time, it will go backward and the red light will be bright.