INTRODUCTION

M9V1 new generation high accuracy lithium battery balanced battery charger, uses the advanced mono lithic intergrated circuit technology, war industry rank high accuracy part, balanced precision reache 0.005V-0.01V, LED instructs the electric quantity balanced function, Intelligent repair lithium battery, dual excessively sufficient protection.
The M9V1 balance charger is great for balance charging of 3-cell Li-Po battery/LiFePO4 battery for electric models. Can charge batteries with 1000mAh capacity to a maximum of 10000mAh. Standard layout charging current 1A,M9V1 Support biggest charging current 3A. If you need the 3A charging current, you need to match 3A current M9V1 Adapter in addition.

SPECIFICATIONS

*Input voltage: M9V1 Adaptor 3 cell Li-Po/3cell LifePO4
*M9V1 Adaptor:3 cell Li-PO/3CELL Li-po4 Charging current:1000MA
*Battery types, 3cell Li-Po/3cell LifEPO4(11.1 LipO/9.6V Lifepo4)
*Standard layout charging current:1000mA. M9V1 support biggest charging current 3A
*Charge method:CC-CV(current drop-off termination)
*Balance precision reache 0.005V-0.01V
*Dual Excessively sufficient protection: 4.25V/cell Li-Po  4.0/cell LiFePO4
*Minium battery capacity: 800mAh
*Charging Status indicator:M9V1 Adapter LED, Red charging/Blue charging completion
*Input:connectors: M9V1 Adaptor jack for DC input
*Output connnectors: 3S balance plug
*M9V1 Balance Aluminum alloy 18mmX45mmx 67mm
*Color Box: 53mmx 142mm x 195mm
*Complete set weight: Appro 205g

SPECAIL FEATURES

*A very econmical, safety and simple way to balance charge Lipo/LiFePO4 battery
*Balanced precision reache 0.005V-0.01V
*Intelligent repair lithium battery
*LED instructs the electric quantity balanced function
*Highly Safety, Dual Excessively sufficient protection
*Highly Effective

IMPORTANT PRECAUTIONS

*Charge only 3-cell Li-Po battery/LiFePO4 battery rechargeable batteries that are 3S(3 cells in series) 11.1V/9.6V nominal voltage, from 800mAh to 10000mAh, which have a balance connector.
*Do not attempt to use this charger with NiCd, NiMH or different types of Lithium-lon batteries as they are not compatible!
*Do not leave the charger unattended while charging. Disconnect the battery and remove input power from charger immediately if either becomes hot! However, it is normal for the charger get warm.
*Disconnect the battery from the charger immediately and remove to a fireproof location if the battery begins to swell or smoke!
Only use M0V1 adaptor to power the charger
*Do not allow water, moisture or foreign objects into the charger.
*Do not block the air intake holes, which could cause the charger to overheat.
*Do not place the charger or any battery on a flammable surface or near a combustible material while in use.
*Do not charge on a carpet, cluttered workbench, paper,plastic, vinyl,leather, wood, or inside an R/C model.
*Never charge inside a full-sized vehicle
*Always disconnect charger from input power when not in use.
*Do not attempt to charge a battery if it is swollen or hot.
*Keep out of reach of children.

CHARGING BATTERIES

*Important!!always charge a LiPo battery in a location that is fireproof.
* NEVER leave the battery unattended while being charged!
If the battery feels warm during charge, remove the battery at once and disconnect the charger from the power source.
*Use only M9V1 Adapter input accessories.
To charge a battery:
1. Connect input power to the M9V1 charger. The M9V1 Adapter LED will be blue, M9V1 balancer power LED indicating standby model will be blue.
2. 2.Connect the battery to be charged to the balance plug. The M9V1 Adaptor LED will be Red, and remain RED during charging. Both LEDs should be lit solid while charging.M9V1 balance power LED will be blue. balance LED instructs the electric quantity balanced function.
3. 3. When the battery is fully charged. The M9V1 Adapter LED will be blue.Balance LED Extinguishment. Remove the battery from the charger at this time.
4. Charging time depends on level of discharge and capacity of the battery. To estimate how long it should take to charge an empty battery, divide the capacity of the battery in mAh by the charge rate in milliamps:
1000mAh battery/1000mA~1.3-1.5 hour
1600mAh battery/1000mA~2-2.5 hour
2200mAh battery/1000mA~2.5-3 hour

Matters needing attention

A. When each cells voltage is quite close, balance LED extinguishes quickly. Otherwise balance LED extinguishes quite slowly. If the battery pack each electricity cell voltage difference is too far, Might present the adapter already to transfer the blue LED, but the balance LED has not extinguished situation. The charger will need the long time to balance.
B. If the adapter presents the red/blue LED to transform frequently, indicated that your battery pack had an electricity core already to damage. Please guarantee each electricity core voltage higher than 3.7V(LiFePO4 3.3V),takes down the adapter, lets M9V1 repair the battery automatically. Then joins the adaptrt charging again.
C.M9V1 cannot repairing the thorough damage battery pack.